Typical St. Lucie County price: about $10,500 to $16,500 for architectural shingles on a roof with about 2,000 square feet of surface. Metal and tile run higher. Your roof size is the biggest variable, so measure it below.
St. Lucie County at a glance
Communities: Port St. Lucie, Fort Pierce, Port Saint Lucie
St. Lucie County roof prices by material
| Material | Per square installed | 22-square roof | Lifespan |
|---|---|---|---|
| Architectural shingle | $475 – $750 | $10,500 – $16,500 | 20–25 yrs |
| Impact-resistant shingle | $600 – $925 | $13,000 – $20,500 | 20–30 yrs |
| Metal, exposed fastener (5V) | $800 – $1,200 | $17,500 – $26,500 | 30–40 yrs |
| Metal, standing seam | $1,000 – $1,800 | $22,000 – $39,500 | 40–60 yrs |
| Concrete tile | $1,000 – $1,900 | $22,000 – $42,000 | 40–50 yrs |
| Flat roof (TPO / modified) | $600 – $1,100 | $13,000 – $24,000 | 15–25 yrs |
What affects roof prices in St. Lucie County
The Space Coast and Treasure Coast run along the Atlantic from Brevard to Martin County. Hurricanes Frances and Jeanne struck this stretch in 2004 within three weeks of each other, and many homes were reroofed then, which puts a lot of those roofs near or past 20 years today.
- Coastal areas of the county can fall in higher wind-speed design zones than inland areas, which can add fasteners or stronger products to the scope.
- Roofs replaced after the 2004 storms are now old enough to draw insurer attention.
- Salt exposure near the ocean and Indian River Lagoon calls for corrosion-resistant fasteners and flashing.
- Tile becomes more common moving south toward Martin County.
Permits, insurance and grants
- Permits: a reroof needs a building permit from your city if you live inside city limits, or from St. Lucie County if you don’t. Your roofer normally pulls it.
- Insurance: Florida law limits when insurers can refuse coverage over roof age. Read the 15-year rule and the 25% rule.
- Discounts: update your wind mitigation report after the new roof.
- Grants: homes permitted before 2008 may qualify for My Safe Florida Home.
- Contractors: verify any roofer’s license at MyFloridaLicense.com.
Licensed roofing companies in St. Lucie County
144 roofing companies with a current, active Florida roofing license are based in St. Lucie County. Here are the longest-licensed. Always check a license yourself before you sign.
| Company | City | License | Licensed since |
|---|---|---|---|
| SPF Roofing Systems, Inc. | Port St. Lucie | Certified | 1978 |
| Pristine Roofing Inc | Port St. Lucie | Certified | 1991 |
| Castonguay Roofing LLC | Fort Pierce | Certified | 1992 |
| The Roof Authority Inc | Fort Pierce | Certified | 1993 |
| Pga Homes Inc | Port St. Lucie | Certified | 1995 |
| Tropical Roofing Systems Inc | Fort Pierce | Certified | 1995 |
| Trade Winds Roofing Inc | Fort Pierce | Certified | 1996 |
| Atlantic Construction and Roofing | Fort Pierce | Certified | 1999 |
| A.Q. Inspection and Repair Inc. | Fort Pierce | Certified | 2000 |
| J.A. Taylor Roofing, Inc. | Fort Pierce | Certified | 2003 |
See all 144 roofing companies in St. Lucie County →
Get your St. Lucie County roof price
Enter your address. We measure your roof from satellite and show Florida price ranges by material. No phone number needed.
Frequently asked questions
How much does a new roof cost in St. Lucie County, FL?
For about 2,000 square feet of roof surface (22 squares with waste), architectural shingles run roughly $10,500 to $16,500 in St. Lucie County. Standing seam metal and concrete tile run about $22,000 to $42,000. Enter your address for a price based on your roof’s measured size.
Do I need a permit to replace my roof in St. Lucie County?
Yes. Florida requires a building permit for a roof replacement. If you live inside a city, the city’s building department usually issues it; otherwise St. Lucie County does. Your roofer normally pulls the permit.
Is St. Lucie County in the High-Velocity Hurricane Zone?
No. Only Miami-Dade and Broward counties are in the High-Velocity Hurricane Zone. St. Lucie County follows the standard Florida Building Code wind requirements for its location.