Typical Pembroke Pines price: about $13,000 to $20,500 for architectural shingles on about 2,000 square feet of roof surface. Measure your roof for a number based on its real size.
Roofing in Pembroke Pines
Pembroke Pines is in the High-Velocity Hurricane Zone, with many 1980s to 2000s tile and shingle subdivisions and active HOAs.
Pembroke Pines roof prices by material
| Material | Per square installed | 22-square roof | Lifespan |
|---|---|---|---|
| Architectural shingle | $594 – $938 | $13,000 – $20,500 | 20–25 yrs |
| Impact-resistant shingle | $750 – $1,156 | $16,500 – $25,500 | 20–30 yrs |
| Metal, exposed fastener (5V) | $1,000 – $1,500 | $22,000 – $33,000 | 30–40 yrs |
| Metal, standing seam | $1,250 – $2,250 | $27,500 – $49,500 | 40–60 yrs |
| Concrete tile | $1,250 – $2,375 | $27,500 – $52,000 | 40–50 yrs |
| Flat roof (TPO / modified) | $750 – $1,375 | $16,500 – $30,000 | 15–25 yrs |
Before you hire a roofer in Pembroke Pines
- Get at least three written quotes that use the same square count.
- Confirm the permit will come from the City of Pembroke Pines building department (or Broward County for unincorporated addresses).
- Check the roofer’s license at MyFloridaLicense.com.
- If your insurer sent a roof letter, read what Florida law allows first.
- Update your wind mitigation report after the job.
Get your Pembroke Pines roof price
Enter your address. We measure your roof from satellite and show Florida price ranges by material. No phone number needed.
Frequently asked questions
How much does a new roof cost in Pembroke Pines, FL?
For about 2,000 square feet of roof surface, architectural shingles run roughly $13,000 to $20,500 in Pembroke Pines. Standing seam metal and concrete tile run about $27,500 to $52,000. Measure your roof by address for a number based on your actual roof.
Who issues roof permits in Pembroke Pines?
For homes inside city limits, the City of Pembroke Pines building department issues reroof permits. Homes in unincorporated areas with a Pembroke Pines mailing address go through Broward County. Your roofer normally pulls the permit.